MR ETOS IM, Руководство по эксплуатации

Страница: 358 / 412

9 Messages
Maschinenfabrik Reinhausen GmbH 2019 358 5163667/06 EN ETOS
®
IM
No. Name Description Remedy Q
1
1156 Operator maintenance
(OLTC) is required Operator maintenance (OLTC) is
required. Carry out operator maintenance
(OLTC). -
1157 Plan operator maintenance
(transformer) Operator maintenance (trans-
former) is required soon. Carry out operator maintenance
(transformer) soon. -
1158 Operator maintenance (trans-
former) is required Operator maintenance (trans-
former) is required. Carry out operator maintenance
(transformer). -
1159 Cooling stage 1 error mes-
sage There is a signal at the error input
for cooling stage 1 Check the connected cooling de-
vice for errors. -
1160 Cooling stage 2 error mes-
sage There is a signal at the error input
for cooling stage 2 Check the connected cooling de-
vice for errors. -
1161 Cooling stage 3 error mes-
sage There is a signal at the error input
for cooling stage 3 Check the connected cooling de-
vice for errors. -
1162 Cooling stage 4 error mes-
sage There is a signal at the error input
for cooling stage 4 Check the connected cooling de-
vice for errors. -
1163 Cooling stage 5 error mes-
sage There is a signal at the error input
for cooling stage 5 Check the connected cooling de-
vice for errors. -
1164 Cooling stage 6 error mes-
sage There is a signal at the error input
for cooling stage 6 Check the connected cooling de-
vice for errors. -
1165 Plan oil filter replacement The oil filter must be replaced
soon. Replace the oil filter soon. -
1166 Oil filter replacement is re-
quired The oil filter must be replaced. Replace the oil filter. -
1167 Plan replacement or change
of contacts The contacts must be replaced or
changed soon. Replace or change the contacts
soon. -
1168 Replacement or change of
contacts is required The contacts must be replaced or
changed. Replace or change the contacts. -
1169 Contact wear calculation The contact wear cannot be cal-
culated. Check the settings, measurement
transformers, and device wiring. -
1170 Plan oil change and cleaning The oil must be changed and
cleaning must be carried out
soon. Change the oil and clean soon. -
1171 Oil change and cleaning re-
quired The oil must be changed and
cleaning must be carried out. Change the oil and clean. -
1172 Desired power factor invalid The set desired power factor is in-
valid. Change the setting of the desired
power factor. -
1173 Raise tap position The device has issued a signal to
raise the tap position. - -
1174 Lower tap position The device has issued a signal to
lower the tap position. - -
1175 Auto mode active The device is in auto mode - -
1176 Remote mode active The device is in remote mode - -
1177 BCD desired value invalid BCD signal for desired value
specification is invalid or outside
the permitted range. Check the signal source and
wiring of the BCD signal. -