MR ETOS IM, Руководство по эксплуатации

Страница: 225 / 412

7 Operation
Maschinenfabrik Reinhausen GmbH 2019 225 5163667/06 EN ETOS
®
IM
You can add, edit or delete sensor definitions.
Figure 169: Sensor editor
Incorrect configurations can cause unwanted device behavior. Ensure that
the sensor configuration is performed only by specialists with knowledge of
the overall system and use the two-man rule for reviewing the configuration.
Adding a sensor definition
You have to set the following values to add a sensor:
Value Description
Sensor name. Entry field, max. 20 characters
Sensor version Format:
X.Y.Z
(e.g. 1.5.2), used together with the sensor
name to provide unique identification of the sensor in the
sensor management menu.
Sensor manufacturer
(optional) Entry field, max. 30 characters
Data points Configuration of the sensor data points
Table 59: Adding sensors
The operation described below is only possible if you access the visualiza-
tion using a computer. You must also have a Parameterizer or Administrator
user role.
To add a sensor, proceed as follows:
1. Go to Settings > Sensor bus > Sensor editor .