manualshive.com logo in svg

MR ETOS IM, Руководство по эксплуатации

Поделиться
Скачать
MR ETOS IM Скачать руководство пользователя страница 19

2 Safety

Maschinenfabrik Reinhausen GmbH 2019

19

5163667/06 EN

ETOS

®

 IM

Operator

The operator uses and operates the product in line with this technical file.
The operating company provides the operator with instruction and training
on the specific tasks and the associated potential dangers arising from im-
proper handling.

Technical Service

We strongly recommend having maintenance, repairs and retrofitting carried
out by our Technical Service department. This ensures that all work is per-
formed correctly. If maintenance is not carried out by our Technical Service
department, please ensure that the personnel who carry out the mainte-
nance are trained and authorized by Maschinenfabrik Reinhausen GmbH to
carry out the work.

Authorized personnel

Authorized personnel are trained by Maschinenfabrik Reinhausen GmbH to
carry out special maintenance.

2.5 Personal protective equipment

Personal protective equipment must be worn during work to minimize risks to
health.

▪ Always wear the personal protective equipment required for the job at

hand.

▪ Never wear damaged personal protective equipment.

▪ Observe information about personal protective equipment provided in the

work area.

Personal protective equipment to be worn at all times

Protective clothing

Close-fitting work clothing with a low tearing
strength, with tight sleeves and with no protrud-
ing parts. It mainly serves to protect the wearer
against being caught by moving machine parts.

Safety shoes

To protect against falling heavy objects and slip-
ping on slippery surfaces.

Содержание ETOS IM





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды