manualshive.com logo in svg

MR ETOS IM, Руководство по эксплуатации

Поделиться
Скачать
MR ETOS IM Скачать руководство пользователя страница 173

7 Operation

Maschinenfabrik Reinhausen GmbH 2019

173

5163667/06 EN

ETOS

®

 IM

7. Use the mouse to drag a selection window in order to zoom into the dia-

gram. Select the 

 button to reduce the diagram back to its original

size.

8. Select the 

 button to save the displayed measured values as a csv file.

Trend curves

If you call up the measured value recorder using a PC, you can display a
trend curve instead of the measured values. The trend curve can, for exam-
ple, be a moving average over a configurable time period.

Figure 122: Creating trend curves

To create the trend curves, proceed as follows:

1. Call up the measurement recorder and the desired measured value se-

ries.

2. Press the 

Trend

 button.

3. Select the desired 

measured values

.

4. Select the desired 

trend function

.

5. Entire the desired 

time period

 for the calculation of the trend curve.

6. Press the 

Accept

 button to display the trend curves.

ð

The trend curve is displayed. Measured values that are displayed as trend

curves are marked with the 

 symbol.

7.10.3 Setting the average value interval

You can use this parameter to set the average value interval of the mea-
sured value recorder for electrical measured variables (current, voltage,
phase angle etc.).

Содержание ETOS IM





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды