Mitsubishi Electric MR-J4W2, Инструкция по эксплуатации

Страница: 426 / 542

17. APPLICATION OF FUNCTIONS
17 - 55
17.2.2 Scale measurement encoder
POINT
Always use the scale measurement encoder cable introduced in this section.
Using other products may cause a malfunction.
For details of the scale measurement encoder specifications, performance and
assurance, contact each encoder manufacturer.
An absolute type linear encoder is necessary to configure an absolute position detection system under scale
measurement function using a linear encoder. In this case, the encoder battery need not be installed to the
servo amplifier. When a rotary encoder is used, an absolute position detection system can be configured by
installing the encoder battery to the servo amplifier. In this case, the battery life will be shorter because the
power consumption is increased as the power is supplied to the two encoders of motor side and load side.
(1) Linear encoder
Refer to "Linear Encoder Instruction Manual" for usable linear encoders.
(2) Rotary encoder
When a rotary encoder is used as a scale measurement encoder, use the following servo motor as the
encoder.
Servo motors used as encoders
HG-KR HG-MR
MR-J4W2-_B
Use a two-wire type encoder cable. Do not use MR-EKCBL30M-L, MR-EKCBL30M-H, MR-EKCBL40M-
H, or MR-EKCBL50M-H as they are four-wire type.
When an encoder cable of 30 m to 50 m is needed, fabricate a two-wire type encoder cable according to
appendix 9.
(3) Configuration diagram of encoder cable
Configuration diagram for servo amplifier and scale measurement encoder is shown below. Cables vary
depending on the scale measurement encoder.
(a) Linear encoder
Refer to "Linear Encoder Instruction Manual" for encoder cables for linear encoder.
Servo amplifier
Linear encoder
CN2A
CN2B
MR-J4FCCBL03M branch cable
(Refer to section 16.2.4.)
Encoder of rotary servo motor
Encoder cable
(Refer to "Linear Encoder Instruction Manual".)
CN2 MOTOR
SCALE
Scale
measurement
encoder