Mitsubishi Electric MR-J4W2, Инструкция по эксплуатации

Страница: 19 / 542

1. FUNCTIONS AND CONFIGURATION
1 - 2
Table 1.1 Connectors to connect from external encoders
Operation mode External encoder communication method
Connector
MR-J4W2-_B MR-J4W3-_B
Linear servo motor system
Two-wire type
CN2A (Note 1)
CN2B (Note 1)
CN2A (Note 1)
CN2B (Note 1)
CN2C (Note 1)
Four-wire type
A/B/Z-phase differential output method
Fully closed loop system
Two-wire type
CN2A (Note 2, 3, 4)
CN2B (Note 2, 3, 4)
Four-wire type (Note 6)
A/B/Z-phase differential output method
Scale measurement function
Two-wire type
CN2A (Note 2, 3, 5)
CN2B (Note 2, 3, 5)
Four-wire type (Note 6)
A/B/Z-phase differential output method
Note 1. The MR-J4THCBL03M branch cable is necessary.
2. The MR-J4FCCBL03M branch cable is necessary.
3. When the communication method of the servo motor encoder is four-wire type and A/B/Z-phase differential output
method, MR-J4W2-_B cannot be used. Use an MR-J4-_B-RJ.
4. This is used with servo amplifiers with software version A3 or later.
5. This is used with servo amplifiers with software version A8 or later.
6. The synchronous encoder Q171ENC-W8 cannot be used due to the four-wire type.