Mitsubishi Electric MR-J4W2, Инструкция по эксплуатации

Страница: 138 / 542

5. PARAMETERS
5 - 43
5.2.4 I/O setting parameters ([Pr. PD_ _ ])
No. Symbol Name and function
Initial
value
[unit]
Setting
range
Each/
Common
PD02 *DIA2 Input signal automatic on selection 2 Refer to Name
and function
column. Each
Setting digit
Explanation
Initial
value
HEX. BIN.
_ _ _ x _ _ _ x FLS (Upper stroke limit) selection
0: Disabled
1: Enabled 0h
_ _ x _ RLS (Lower stroke limit) selection
0: Disabled
1: Enabled
_ x _ _ For manufacturer setting
x _ _ _
_ _ x _ For manufacturer setting 0h
_ x _ _ 0h
x _ _ _ 0h
Convert the setting value into hexadecimal as follows.
0
BIN 0: Disabled (Use for an external input signal.)
BIN 1: Automatic on
Initial value
BIN HEX
Signal name
0
0
0 0 0
0
0
FLS (Upper stroke limit) selection
RLS (Lower stroke limit) selection
When you perform a magnetic pole detection without using FLS (Upper stroke limit)
and RLS (Lower stroke limit), setting [Pr. PL08 Linear servo motor/DD motor function
selection 3] to "_ 1 _ _" allows you to disable FLS and RLS.