Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Страница: 614 / 646

612
APPX
Appendix 9 Analog monitor
*1 Encoder pulse unit.
*2 Available in position mode
*3 This cannot be used in the torque mode.
*4 For 400 V class servo amplifier, the bus voltage b8 V/800 V.
*5 This cannot be used in the velocity mode.
*6 Output in the load-side encoder unit for the fully closed loop control. Output in the servo motor encoder unit for the semi closed loop
control.
*7 For details on the value of the maximum current command (maximum torque) for ±8 V, refer to the following.
 Page 614 Maximum current command (maximum torque) for analog monitor ±8 V
16 Servo motor-side/load-side speed deviation
17 Internal temperature of encoder
(

10 V/

128

)
Setting value Output item Description
Maximum speed
CW direction
CCW direction
Maximum speed
0
8 [V]
-8 [V]
128 [°C]
-128 [°C]
0
10 [V]
-10 [V]