Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Страница: 143 / 646

4 STARTUP
4.5 Test operation mode
141
4
Operation procedure
1.
Turn off the power.
2.
Turn "ON (up)" SW1-1.
Turning "ON (up)" SW1-1 during power-on will not start the test operation mode.
3.
Turn on the servo amplifier.
When initialization is completed, the decimal point on the first digit will blink.
When an alarm or warning also occurs during the test operation, the decimal point on the first digit will blink as follows.
4.
Start operation with the personal computer.
Set SW1-1 to "ON (up)".
1
ON
2
1
ON
2
After 1.6 s
After 0.2 s
Blinking
After 0.8 s After 0.8 s
After 0.2 s
Blinking Blinking