manualshive.com logo in svg

Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Инструкция по эксплуатации Mitsubishi Electric MELSERVO-J4 находится на нашем сайте. Здесь вы можете бесплатно скачать руководство пользователя, чтобы ознакомиться с возможностями этого продукта. Посетите {сайт} для загрузки инструкции.

Поделиться
Скачать
background image

218

5  PARAMETERS
5.2  Detailed list of parameters

Linear servo motor/DD motor setting parameters ([Pr. PL_ _ ])

The linear servo motor control mode and DD motor control mode are available for servo amplifiers with 
software version A1 or later.

PF41
FPMT
Failure prediction - 
Servo motor total 
travel distance

Set a servo motor total travel distance required for determining the threshold used in the friction failure 
prediction function and the servo motor total travel distance failure prediction function. The setting unit can be 
changed with "Failure prediction - Servo motor total travel distance unit selection" in [Pr. PF34].
When the servo motor total travel distance exceeds 1/2 of "Failure prediction - Servo motor total travel 
distance unit 

 Failure prediction - Servo motor total travel distance", the threshold will be automatically 

calculated for the friction failure prediction function.
When [Pr. PF34 Servo motor total travel distance failure prediction warning selection] is enabled, if the servo 
motor total travel distance exceeds the value of "Failure prediction - Servo motor total travel distance unit 

 

Failure prediction - Servo motor total travel distance", [AL. F7.3 Total travel distance failure prediction 
warning] will occur.
This parameter is available with servo amplifiers with software version A3 or later.
Setting range: 0 to 9999

0 [rev]/[m]

PF42
PAV
Friction failure 
prediction - Average 
characteristic

Set a friction torque average at rated speed. This parameter is enabled only when "Manual threshold setting 
(_ _ _ 2)" is set in [Pr. PF34 Friction failure prediction warning selection].
When "Automatic threshold setting (_ _ _ 1)" is set in [Pr. PF34 Friction failure prediction warning selection], 
the value will be calculated automatically from the estimated friction torque at rated speed.
This parameter is available with servo amplifiers with software version A3 or later.
Setting range: -10000 to 10000

0 [0.1%]

PF43
PSD
Friction failure 
prediction - 
Standard deviation

Set a friction torque standard deviation at rated speed. This parameter is enabled only when "Manual 
threshold setting (_ _ _ 2)" is set in [Pr. PF34 Friction failure prediction warning selection].
When "Automatic threshold setting (_ _ _ 1)" is set in [Pr. PF34 Friction failure prediction warning selection], 
the value will be calculated automatically from the estimated friction torque at rated speed.
This parameter is available with servo amplifiers with software version A3 or later.
Setting range: 0 to 20000

0 [0.1%]

PF45
VAV
Vibration failure 
prediction - Average 
characteristic

Set a vibration level average during servo motor operation. This parameter is enabled only when "Manual 
threshold setting (_ _ _ 2)" is set in [Pr. PF34 Friction failure prediction warning selection].
When "Automatic threshold setting (_ _ _ 1)" is set in [Pr. PF34 Friction failure prediction warning selection], 
the value will be calculated automatically from the estimated friction torque at rated speed.
This parameter is available with servo amplifiers with software version A3 or later.
Setting range: 0 to 10000

0 [0.1%]

PF46
VSD
Vibration failure 
prediction - 
Standard deviation

Set a vibration level standard deviation during servo motor operation. This parameter is enabled only when 
"Manual threshold setting (_ _ _ 2)" is set in [Pr. PF34 Friction failure prediction warning selection].
When "Automatic threshold setting (_ _ _ 1)" is set in [Pr. PF34 Friction failure prediction warning selection], 
the value will be calculated automatically from the estimated friction torque at rated speed.
This parameter is available with servo amplifiers with software version A3 or later.
Setting range: 0 to 20000

0 [0.1%]

No./symbol/
name

Setting 
digit

Function

Initial 
value
[unit]

PL01
**LIT1
Linear servo motor/
DD motor function 
selection 1

_ _ _ x

Linear servo motor/DD motor magnetic pole detection selection
The setting value "0" will be enabled only with absolute position linear encoders.
0: Magnetic pole detection disabled
1:  Magnetic pole detection at first servo-on
5:  Magnetic pole detection at every servo-on

1h

_ _ x _

For manufacturer setting

0h

_ x _ _

Stop interval selection at the home position return
Set a stop interval for the dog type home position return.
The digit is enabled only for linear servo motors.
0: 2

13 

(= 8192) pulses

1: 2

17 

(= 131072) pulses

2: 2

18

 (= 262144) pulses

3: 2

20

 (= 1048576) pulses

4: 2

22

 (= 4194304) pulses

5: 2

24 

(= 16777216) pulses

6: 2

26 

(= 67108864) pulses

3h

x _ _ _

For manufacturer setting

0h

No./symbol/
name

Setting 
digit

Function

Initial 
value
[unit]

Содержание MELSERVO-J4 series







































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSERVO-J4 series

Crown I-Tech I-T4000 Brochure preview
I-Tech I-T4000
Бренд: Crown Страницы: 6
dB OKUR A5 125.4 User Manual preview
OKUR A5 125.4
Бренд: dB Страницы: 6
Akai AM-U310 Operator'S Manual preview
AM-U310
Бренд: Akai Страницы: 9
Altinex DA1904SX User Manual preview
DA1904SX
Бренд: Altinex Страницы: 10
Texas Instruments TPA6030A4 User Manual preview
TPA6030A4
Бренд: Texas Instruments Страницы: 25
Fender Vibrasonic AMP Service Manual preview
Vibrasonic AMP
Бренд: Fender Страницы: 9
IC Audio AMP 480 User Manual preview
AMP 480
Бренд: IC Audio Страницы: 25
MC Crypt 30 39 70 User Manual preview
30 39 70
Бренд: MC Crypt Страницы: 2
Balanced Audio Technology VK-40 Owner'S Manual preview
VK-40
Бренд: Balanced Audio Technology Страницы: 18
Cambridge SoundWorks BASSCUBE 821 User Manual preview
BASSCUBE 821
Бренд: Cambridge SoundWorks Страницы: 16
Gallien-Krueger Microbass MB150S Service Manual preview
Microbass MB150S
Бренд: Gallien-Krueger Страницы: 21
Invasion BS15 Owner'S Manual preview
BS15
Бренд: Invasion Страницы: 4
Technics SA-CH750 Service Manual preview
SA-CH750
Бренд: Technics Страницы: 22
XOTIC EFFECTS Bass BB BB Preamp User Manual preview
Bass BB BB Preamp
Бренд: XOTIC EFFECTS Страницы: 1
Hubert A1230-02 Operating Manual preview
A1230-02
Бренд: Hubert Страницы: 28
PowerWave G3L-800-25-001 Installation & Service Manual preview
G3L-800-25-001
Бренд: PowerWave Страницы: 21
M-system 20VS5-201 Instruction Manual preview
20VS5-201
Бренд: M-system Страницы: 4
Harman JBL Stage A3001 Service Manual preview
JBL Stage A3001
Бренд: Harman Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды