Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Страница: 422 / 646

420
11 OPTIONS AND PERIPHERAL EQUIPMENT
11.14 Noise reduction techniques
Noise reduction products
■
Data line filter (recommended)
Noise can be prevented by installing a data line filter onto the encoder cable, etc.
For example, ZCAT3035-1330 by TDK, ESD-SR-250 by NEC TOKIN, GRFC-13 by Kitagawa Industries, and E04SRM563218
by SEIWA ELECTRIC are available as data line filters.
As a reference example, the impedance specifications of the ZCAT3035-1330 (TDK) are indicated below. These impedances
are reference values and not guaranteed values.
■ Surge killer (recommended)
Use of a surge killer is recommended for AC relay, magnetic contactor or the like near the servo amplifier. Use the following
surge killer or equivalent.
Ex.
CR-50500 (Okaya Electric Industries)
Note that a diode should be installed to a DC relay or the like.
Maximum voltage: Not less than four times the drive voltage of the relay or the like.
Maximum current: Not less than twice the drive current of the relay or the like.
Impedance [

]
10 MHz to 100 MHz 100 MHz to 500 MHz
80 150
Rated
voltage
AC [V] C [

F

20%]
R [
 
30%]
Test voltage Dimensions [Unit: mm]
250 0.5 50 (1/2W) Between
terminals: 625
V AC, 50 Hz/60
Hz 60 s
Between
terminal and
case: 2000 V
AC
50/60 Hz 60 s
Outline drawing (ZCAT3035-1330)
Loop for fixing the
cable band
[Unit: mm]
Lot number
Product name
TDK
39 ± 1
34 ± 1
˳
13 ± 1
˳
30 ± 1
MC
SK
Surge killer
Relay
Surge killer
MC
ON
OFF
This distance should be short
(within 20 cm).
6 ± 1
300 min. 300 min.
Soldered
Band (clear) AWG 18 Twisted wire
15 ± 1
48 ± 1.5
CR-50500
6 ± 1
16 ± 1
(18.5 + 5) max.
˳ 3.6
˳
(18.5 + 2) ± 1
- +
Diode
RA