Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Страница: 473 / 646

14 USING A LINEAR SERVO MOTOR
14.3 Operation and functions
471
14
14.3
Operation and functions
Startup
When using the linear servo motor, set [Pr. PA01] to "_ _ 4 _".
Startup procedure
Start up the linear servo system in the following procedure.
*1 Use MR Configurator2.
Setting of linear servo motor series and linear servo motor type
To use the linear servo motor, set the linear servo motor series and linear servo motor type with [Pr. PA17 Servo motor series
setting] and [Pr. PA18 Servo motor type setting].

Page 183 Basic setting parameters ([Pr. PA_ _ ])
Set the linear servo motor series and linear servo motor type.
(Refer to (2) in this section.)
Set the linear encoder direction and the linear servo motor direction.
(Refer to (3) in this section.)
*1
Set the linear encoder resolution. (Refer to (4) in this section.) *1
Change the setting to disable the
magnetic pole detection.
(Refer to (3) of section 14.3.2.)
What is the type of the
linear encoder?
Installation and wiring
Perform the magnetic pole detection. (Refer to (3) of section 14.3.2.)
*1
Positioning operation check using the test operation mode
(Refer to section 14.3.4.)
*1
Positioning operation check using the controller (Refer to section 14.3.5.)
Home position return operation (Refer to section 14.3.3.)
Positioning operation
Incremental linear encoder Absolute position linear encoder