Mercury HP700 SCi Скачать руководство пользователя страница 62

Страница: 62 / 138

MAINTENANCE

• Explaining and demonstrating the operation of the power

package and boat.

• Providing the customer with a copy of a

Pre-delivery

Inspection Checklist

prior to delivery.

Replacement Service Parts

WARNING

Avoid fire or explosion hazard. Electrical, ignition, and fuel

system components on Mercury Marine products comply with

federal and international standards to minimize risk of fire or

explosion. Do not use replacement electrical or fuel system

components that do not comply with these standards. When

servicing the electrical and fuel systems, properly install and

tighten all components.

Marine engines are expected to operate at or near full throttle for

most of their life. They are also expected to operate in fresh and

saltwater environments. These conditions require numerous

special parts. Care should be exercised when replacing marine

engine parts, as specifications are quite different from those of the

standard automotive engine.
For example, one of the most important, and probably the least

suspected special replacement part, is the cylinder head gasket.

Since saltwater is highly corrosive, the steel‑type automotive head

gasket cannot be used. A marine engine head gasket uses special

materials to resist corrosive action.
Since marine engines must be capable of running at or near

maximum RPM much of the time, special valve springs, valve

lifters, pistons, bearings, camshafts and other heavy‑duty moving

parts are required for long life and peak performance.
These are but a few of the many special modifications that are

required in Mercury Marine engines to provide long life and

dependable performance.

Do‑It‑Yourself Maintenance Suggestions

If you are one of those persons who likes to do‑it‑yourself, here are

some suggestions for you.

Содержание HP700 SCi











































































































































Результаты поиска

Содержание HP700 SCi

Отзывы:

Mercury HP700 SCi, Руководство пользователя, Страница: 62 / 138

Результаты поиска

Содержание HP700 SCi

Отзывы: