Mercury HP700 SCi Скачать руководство пользователя страница 1

Страница: 1 / 138

Thank You

for your purchase of one of the finest marine power packages

available. It incorporates numerous design features to assure

operating ease and durability.
With proper care and maintenance, you will thoroughly enjoy

using this product for many boating seasons. To ensure

maximum performance and carefree use, we ask that you

thoroughly read this manual.
The Operation, Maintenance & Warranty Manual contains

specific instructions for using and maintaining your product.

We suggest that this manual remain with the product for ready

reference whenever you are on the water.
Again, thank you for purchasing one of our Mercury Marine

products. We sincerely hope your boating will be pleasant!

Mercury Racing,

N7480 County Road "UU"

Fond du Lac, WI 54935-9585

7406

Warranty Message

WARNING

The operator (driver) is responsible for the correct and safe

operation of the boat, the equipment aboard and the safety

of all occupants aboard. We strongly recommend that the

operator read this Operation, Maintenance and Warranty

Manual and thoroughly understand the operational

instructions for the power package and all related

accessories before the boat is used.

HP700 SCi (NXT¹ and NXT¹/SSM Drive)

90-8M8024593 109

Содержание HP700 SCi











































































































































Результаты поиска

Содержание HP700 SCi

Отзывы:

Mercury HP700 SCi, Руководство пользователя, Страница: 1 / 138

Результаты поиска

Содержание HP700 SCi

Отзывы: