![background image](http://html1.mh-extra.com/html/magnetek/hpv-900-series-2/hpv-900-series-2_technical-manual_3606659130.webp)
Display D0 Menu
108
Display D0 Menu
Elevator Data D1 Submenu
Parameter
[Alphanumeric]
Description
Units
Hidden
item
Speed Command
[D101]
(Speed Command) - Monitors the speed command before the
speed reference generator (input to the S-Curve). This command
comes from multi-step references, speed command from analog
channel, or the serial channel.
ft/min or
m/s
N
Speed Reference
[D102]
(Speed Reference) - Monitors the speed reference being used by
the drive. This is the speed command after passing through the
speed reference generator (which uses a S-Curve).
ft/min or
m/s
N
Speed Feedback
[D103]
(Speed Feedback) - Monitors the speed feedback coming from
the encoder. It is based on contract speed, motor rpm and
encoder pulses per revolution. The drive converts from motor
RPM to linear speed using the relationship between the
CONTRACT CAR SPD (A1) and CONTRACT MTR SPD (A1)
parameters.
ft/min or
m/s
N
Analog Spd Cmd
[D104]
(Analog Speed Command) - Displays the analog speed command
raw voltage before adjusting for SPD COMMAND BIAS, SPD
COMMAND MULT, and SPD ZERO BAND.
volts
N
Encoder Speed
[D105]
(Encoder Speed) - Monitors encoder speed in rpm.
rpm
N
Speed Error
i,ii
[D106]
(Speed Error
i,ii
) - Monitors the speed error between the speed
reference and the speed feedback. It is equal to the following
equation:
error
speed
feedb ack
speed
reference
speed
ft/min or
m/s
i,ii
N
i,ii
Est Inertia
i,ii
[D107]
(Estimated Inertia
i,ii
) - Estimated elevator system inertia.
secs
i,ii
N
i,ii
Logic Outputs
[D108]
(Logic Outputs Status) - This display shows the condition of the
logic outputs. (1=true 0=false)
1=true
0=false
N
i
Parameter accessible through
CLOSED LOOP (U9)
Operation
ii
Parameter accessibly through
PM (U9)
Operation
iii
Parameter accessible through
OPEN LOOP(U9)
Operation
D1 8:55
Logic Outputs
0000-000
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
Logic Output 1
Logic Output 4
Relay Coil 1
Relay Coil 2
User LED
Содержание HPV 900 Series 2
