Magnetek HPV 900 Series 2, Техническое руководство

Страница: 129 / 230

Analog Outputs C4 Submenu
107
choices… choice descriptions… D/A units…
spd rg tq cmd
[19]
(Speed Regulator Torque Command) Torque command from speed
regulator.
% base torque
Speed command
[20]
(Speed Command) Speed Command before S-Curve % rated speed
speed error
[21]
(Speed Error) Speed reference minus speed feedback. % rated speed
speed feedbk
[22]
(Speed Feedback) Speed feedback used by speed regulator. % rated speed
speed ref
[23]
(Speed Reference) Speed reference after S-Curve % rated speed
tach rate cmd
[24]
(Tachometer Rate Command) Torque command from tach rate gain
function.
% base torque
theta e
[25]
(Polarity Error Signal) Magnet polarity estimation error signal used for
PM motor characterization with respect to quick align.
Internal drive unit
torq current
[26]
(Torque Producing Current) Measured torque producing current. % rated current
torque ref
[27]
(Torque Reference) Torque reference used by vector control. % base torque
torq voltage
[28]
(Torque Producing Voltage) Torque producing voltage reference. % rated volts
torque output
[29]
(Torque Output) Calculated torque output. % rated torque
voltage out
[30]
(Voltage Output) RMS motor terminal voltage. % rated volts
Table 19: Analog Outputs C4 Submenu