![background image](http://html1.mh-extra.com/html/magnetek/hpv-900-series-2/hpv-900-series-2_technical-manual_3606659148.webp)
Fault F0 Menu
126
Sorted History
The sorted history displays all faults and the
number of times they have occurred since that
last fault history clearing. The faults are listed
by occurrence. The most numerous
occurrences will appear at the top of the list.
Press the enter key to enter the sorted history
list. Use the up and down arrow keys to scroll
through the sorted history.
RESET FAULTS
(Reset Faults)
This sub-menu allows the user to reset both
the active fault and the fault history.
Rst Active Flts
The active faults may be reset by the user
function as described below.
While the digital operator display shows:
Press the enter key. The submenu LED will
turn ON, and the Digital Operator will display:
Press the enter key, then use the down arrow
to get the following display:
Press the enter key. The drive will reset the
active fault list and display the following:
Note: if an active fault still exists on the drive,
the FAULT LED will continue to be lit. Clear
the condition causing the fault and attempt to
reset the faults again.
Clr Flt Hist
The fault history list and sorted history list may
be reset by the user function as described
below.
While the digital operator display shows:
F3 8:55
1 CHARGE FAULT
00002
– counts
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
8:55
F0 FAULTS
F4 RESET FAULTS
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
F4 8:55
Rst Active Flts
IDLE
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
F4 8:55
Rst Active Flts
Enter to Rst
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
F4 8:55
Rst Active Flts
IDLE
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
8:55
F0 FAULTS
F4 RESET FAULTS
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
Содержание HPV 900 Series 2
