Maeda MC815C, Руководство по эксплуатации, Страница: 65 / 426

55
7. MAINTENANCE PRECAUTIONS
7.1 PRECAUTIONS BEFORE MAINTENANCE
FAILURE REPORT
Execution of maintenance not described in our manual may cause unexpected failures.
Ask us or our sales service agency for repair.
CLEAN BEFORE INSPECTION OR MAINTENANCE
• Before starting an inspection or maintenance, clean the
Machine and prevent rubbish from entering the Machine and
make sure the safety will be ensured during maintenance.
• Attempt to inspect or maintain the Machine still dirty not only
lessens chance of locating faulty part, but may cause
rubbish or mud entering your eye, or slipping and tripping
that result in injury.
• Always observe the following when washing the vehicle.
• Use antislip shoes to prevent slips and trips caused by wet
foothold.
• Put on protective equipment when using a high pressure
steam car washer. Avoid an accident from high pressure
water which causes skin laceration or mud or other
substance to fly to eyes.
• Do not directly spray water onto the electrical system
(sensors, connector (1), receiving box and related). Water
entering the electrical system is dangerous and will cause
faulty or improper operations.
TIDY UP WORKPLACE
Always tidy away tools, hammers and other things that obstruct the working area; grease and
oil should be wiped off immediately after use.
An untidy workplace may cause safety hazards and result in injuries to personnel.
FOLLOW SUPERVISOR'S INSTRUCTION DURING TEAMWORK
Appoint a person who supervises the work and follow his/her instructions in case of Machine
repair or installing/uninstalling a work device.
Unexpected accidents due to misunderstood communication between workers may occur
during teamwork.
USE APPROPRIATE TOOLS
Do not use damaged or deteriorated tool, or use a tool for a
purpose other than the proper purpose. Use tools suitable for
the maintenance work.
Entrance of a broken piece of a tool such as a boss with
crashed head or a hammer may destroy eyesight.