manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 289 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 289

279 

5.  Press the mode switch (5) of the monitor or touch the 

screen to enter the “contact” mode. 

6.  Press the mode switch (6) of the monitor or touch the 

screen to enter the “manual” mode. 

7. Contact the trays securely by turning the outrigger 

contact switch (7) on the outrigger control panel to “Out” 

position and make all four outriggers grounded. 

Check that all the contact lamps (3) of the monitor are 

lit. 

CAUTION 

If any of the contact lamps (3) is flashing in red, check 
any foreign objects in the bending part by removing 
the cover (9) of the outrigger tray (8) part. 

 

 

 

 

 

 

 

8.  Turn one of the four outriggers’ outrigger contact switch 

(7) to “On” position to move the tray of outrigger above 

the ground. 

9.  Press the mode switch of the monitor or touch the 

screen to enter the “crane mode”. 

10. 

Move the operation lever on the right to the right 

direction (rise) and check that the crane does not move. 

NOTES 

Perform the operation starting from section 8 to 10 for all 
four outriggers. 

 

 

 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов