Maeda MC815C, Руководство по эксплуатации, Страница: 63 / 426

53
6. BATTERY HANDLING PRECAUTIONS
CAUTIONS WHEN HANDLING BATTERY
The battery fluid contains diluted sulphuric acid and
generates hydrogen gas, and causes accidents and fires if
handled improperly, so always observe the following
precautions:
• Do not let a cigarette or any fire source approach the
battery.
• Always wear protective glasses and rubber gloves before
handling the battery.
• If the battery fluid contacted clothing or skin, immediately
wash away by huge quantity of water.
• If the battery fluid enters your eyes, wash immediately with
water and see a doctor as soon as possible.
• If you have accidentally swallowed the battery fluid,
immediately drink a huge quantity of water, milk, raw egg or
vegetable oil, and see a doctor as soon as possible.
• Wipe with a wet clean cloth when cleaning the battery upper
surface or related part. Do not use organic solvent or
detergent such as petrol or paint thinner.
• Fully tighten the battery cap.
• If the battery fluid is frozen, do not charge battery or start the
engine using other power source. Such act may cause the
battery to catch fire.
• Defrost the battery fluid and check for battery fluid leak
before charging or starting the engine.
• Always detach the battery from the Machine frame before
charging the battery.
CAUTIONS WHEN STARTING UP USING BOOSTER CABLE
Wrong booster cable connection method may result in fire, so
always observe the following.
• Start the engine by two persons, with one standing on the
driving operation position in the travel operation panel side.
• When starting the engine using other Machine, be careful to
prevent contact between the normal Machine and broken
Machine.
• Keep the starter switch key of both the normal Machine and
the broken Machine in “OFF” position when the booster
cable is connected.
• Do not connect to wrong side [connecting (+) to (-), (-) to (+)]
when connecting the booster cable.
• Start connecting from (+) terminal first, but start
disconnecting from (-) terminal (ground) first.
• Connect the ground to the negative (-) terminal of the
battery of the broken machine when connecting the ground
as the last procedure.
See “OPERATION 9.4 STARTING ENGINE WITH
BOOSTER CABLE” for details.
• Avoid contact between clips of the booster cable, and
contact between a clip and the Machine when disconnecting
the booster cable.