Maeda MC815C, Руководство по эксплуатации, Страница: 193 / 426

183
3.2 POWERING ON
1.
Press the remote controller power ON/OFF switch (3)
once, and make sure that the power indicator on the
upper left corner of the left display (M1) blinks in green.
“Enter start sequence” appears on the right-side
monitor (M2) when the remote controller is preparing
to be powered ON.
NOTES
When the controller is ready for power-on, performing one
of the following operations will turn OFF the power to the
controller:
• Press and hold the remote controller power ON/OFF
switch (3).
• A switch other than the remote controller power ON/OFF
switch (3) is pressed.
• The controller has been left un-operated for 5 second or
longer.
2.
When the controller is ready for power-on, pressing and
holding the remote controller power ON/OFF switch (3)
will change the display indication, and turn on the
power.
CAUTION
If the controller does not power on, check the
controller for the following:
• Is the battery charged fully?
• Is the emergency stop/remote control power OFF
switch (10) pressed?
3. In order t
o make the crane operation possible, you need
to press the ON/OFF switch (3) again when the
controller power is on.
CAUTION
To make the crane operation possible with the controller,
you need to press the remote controller power ON/OFF
switch (3) for 3 times in total.