manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 138 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 138

128 

1.7 OPERATOR SEAT 

 
 
 
 
 

(1) Back seat 
(2) Seat  
(3) Slide adjustment lever 
(4) Reclining adjustment lever  
(5) Arm rest 
(6) Seatbelt 

 

•  Before driving and operating the machine, be sure to adjust the operator seat. Be sure 

to adjust the operator seat particularly after use by other operators.  

• Adjust the operator seat with your back against the operator seat so that you can 

effortlessly operate the accelerator pedal, crane control levers, and control levers. 

•  Never adjust the operator seat while driving the machine. 

 

[1] SEAT FORE-AND-AFT ADJUSTMENTS  

Use the slide adjustment lever (3) to adjust the seat. 
1.  Move the seat (2) back and forth while pulling the slide 

adjustment lever (3) upward.  

2.  After adjusting seat (2) position, release your hand from 

the slide adjustment lever (3).  
The seat (2) will be fixed at that position.  

 

[2] RECLINING ADJUSTMENT  

Use the reclining adjustment lever (4) to adjust the seat. 
1.  Fold the seat (1) forward and backward while pulling the 

reclining adjustment lever (4) forward. 

2. After adjusting the reclining angle of the seat (1), 

release your hand from the reclining adjustment lever 
(4). 
The seat (1) will be fixed at that angle. 

 

 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов