Maeda MC815C Скачать руководство пользователя страница 317

Страница: 317 / 426

307

7. Check the inside of the element by illuminating with a

light bulb and if any pores or thinned parts are found,

replace the element.

8. Clean inside the dust pan (2) and the rubber cup (5).

9. Remove the cloth or tape from the air connector at the

back of the air cleaner body (4).

10. Insert the cleaned element (3) into the air cleaner body

(4).

11. Mount the dust pan (2) by matching the arrow to the

mating mark on the air cleaner body (4).

12. Secure the clamps (1) (3 places).

13. See “OPERATION 1.9 RADIATOR GRILL” and install

the radiator grill. See “OPERATION 1.12 OPERATION

SIDE COVER” and install the operation side cover.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 317 / 426

Результаты поиска

Содержание MC815C

Отзывы: