Maeda MC815C Скачать руководство пользователя страница 201

Страница: 201 / 426

191

[3] CHANGING DIRECTION WHILE MOVING

• LEFT TURN WHILE MOVING FORWARD

While pushing the right control lever (2) forward, move only
the left control lever (1) back to the “NEUTRAL” position.

• LEFT TURN WHILE MOVING BACKWARD

While pulling the right control lever (2) toward you, move
only the left control lever (1) back to the “NEUTRAL”
position.

• RIGHT TURN WHILE MOVING FORWARD

While pushing the left control lever (1) forward, move only
the right control lever (2) back to the “NEUTRAL” position.

• RIGHT TURN WHILE MOVING BACKWARD

While pulling the left control lever (1) toward you, move
only the right control lever (2) back to the “NEUTRAL”
position.

3.6.3 STOPPING/PARKING THE MACHINE

• Avoid sudden stops and try to stop with a safety

margin whenever possible.

• Choose a level and solid location for parking the

machine.

If it is necessary to park on a slope, provide some

blocks so that the machine will not move.

• When parking the machine, make sure to shift the

lock lever into the lock position.

• When leaving the machine, be sure to stop the

engine, remove the key from the starter switch, and
take it with you.

1. Shift the left control lever (1) and right control lever (2)

into the “NEUTRAL” position at the same time. The
brake is automatically applied and the machine stops.

2. Shift the lock lever (1) into the lock (L) position.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 201 / 426

Результаты поиска

Содержание MC815C

Отзывы: