Maeda MC815C Скачать руководство пользователя страница 410

Страница: 410 / 426

400

6. Tighten the nut (8) on the tip side of the head pin (13).

7. Remove the nut (8), the plate (7) and the collar (6) on the tip side

of the point pin (5) and pull out the point pin (5) to remove the

searcher hook bracket (4).

The searcher hook bracket (4) will fall when the point pin (5)
is pulled out; be sure to support the bracket and pull the pin
out slowly.

NOTES

The searcher hook bracket (4) should be hung from the head pin
(13) by its design; remove by pulling it out toward you.

8. Tighten the nut (8) you loosened in step 6.

9. Secure the searcher hook bracket (4) you have removed with

the eye bolt (15) and the washer (16) to the stowage bracket

(14) on the front of vehicle and stow it.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 410 / 426

Результаты поиска

Содержание MC815C

Отзывы: