Maeda MC815C Скачать руководство пользователя страница 206

Страница: 206 / 426

196

3.7.2 OUTRIGGER STOWAGE OPERATION

Before setting outriggers, read “OPERATION 2. 24 OUTRIGGER SETTING OPERATION”
and also the precautions described there.

The following explains the setting procedure for only one
outrigger (4). Repeat the same procedure for the other
three outriggers.

1. See “OPERATION 3.4 STARTING/STOPPING THE

ENGINE” to start the engine.

2. Set the mode selector switch (5) for the transmitter to

Outrigger (F) or (R).

• Outrigger (F) operates outriggers (1) and (4).

• Outrigger (R) operates outriggers (2) and (3).

NOTES

When operating by radio controller, the 4 outriggers
cannot be operated at the same time. Nor can the front
and rear outriggers.

3. Make sure that the crane stowage lamp (1) on the

monitor is lit in yellow.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 206 / 426

Результаты поиска

Содержание MC815C

Отзывы: