manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 292 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 292

282 

[3] CHECKING CRANE OPERATIONS 

To check the operation of the crane, see “OPERATION 2.14 OUTRIGGER SETTING 
OPERATION” and make sure to set the outriggers to maximum. 
To check the operation of the crane, see “OPERATION 2.15 CAUTIONS BEFORE CRANE 
OPERATION” to “OPERATION 2.23 CRANE STOWAGE OPERATION” and observe the 
procedure and precautions.

 

 

1.  Pull the operation lever on the right inward and check 

that the boom rises smoothly. Also, push the operation 

lever on the right outward and check that the boom 

lowers smoothly. At this time, check if abnormal noise is 

generated from the parts of the boom or boom 

derricking cylinder. Repair if any abnormality is found. 

 

2.  Push the operation lever on the left forward and check 

that the boom extends smoothly. Also, pull the 

operation lever on the left backward and check that the 

boom retracts smoothly. At this time, check if abnormal 

noise is generated from the parts of the boom or boom 

telescoping cylinder. Repair if any abnormality is found. 

 

3.  Push the operation lever on the right forward and check 

that the hook is unwound smoothly. Also, pull the 

operation lever on the right backward and check that 

the hook is wound smoothly. At this time, check if 

abnormal noise is generated from various parts of the 

boom and winch motor. Repair if any abnormality is 

found. 

 

4.  Push the operation lever on the left outward and check 

that the crane rotates counterclockwise smoothly. Also, 

pull the operation lever on the left inward and check that 

the crane rotates clockwise smoothly. At this time, 

check if abnormal noise is generated from around the 

post. Repair if any abnormality is found. 

 

 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов