Maeda MC815C, Руководство по эксплуатации, Страница: 62 / 426

52
CAUTIONS WHEN LOADING/UNLOADING WITH CRANE
Be careful of the following when loading or unloading the
Machine by hoisting with a crane.
• When hoisting the machine, do not use the brackets on the
top face of the boom.
• When hoisting the machine, attach slings (1) such as
shackles to the holes (4 locations) of outrigger rotary and
hang wire ropes (2) (4 pieces) on the hook (3).
• Only use crane, wire ropes (2) and slings (1) (e.g. shackles)
which are approved and capable of lifting the mass (weight)
of the machine.
When lifting up the machine with 4-rope lifting at 4 locations,
see the plate shown in the figure on the right for the load
applied to each wire rope.
• When hoisting the machine, be sure to set the machine to
the “traveling posture” and securely insert the position pins
(4 pieces) to the outrigger rotary parts.
The center of gravity of the machine is determined in the
condition where the machine is in the “traveling posture”.
See “OPERATION 2.5 MACHINE TRAVELLING
POSTURE” for details.
• When transporting the machine with a crane, use a proper
carriage deck as shown in the figure on the right, for safe
transportation.
Recommended sling
• Wire rope (front 2 ropes): breaking load 10.0 t or more
• Wire rope (rear 2 ropes): breaking load 10.0 t or more
• Shackle: working load 2.5 t or more
Hoisted weight of main unit
(standard specifications)
Hoisted weight of main unit
(engine and electric motor
specifications)