Maeda MC815C Скачать руководство пользователя страница 294

Страница: 294 / 426

284

[6] INSPECTION OF OUTRIGGER EXTENSION POSITION

Start the engine and extend the outriggers to “medium”

and “maximum” positions, and check if the monitor

display of the moment limiter is correct.

NOTES

To adjust the outrigger extension, check the sticker
(medium, maximum) on the top side of inner box.

[7] CHECKING ENGINE EXHAUST GAS COLOUR,

NOISE AND VIBRATION

1. Release the acceleration pedal

(6)

to low idling position

so that the engine is kept in no load operation for 5

minutes.

2. Verify that the engine exhaust gas color is either

transparent or slightly blue. Also, check for abnormal

noises and vibrations.

Repair if any abnormality is found.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 294 / 426

Результаты поиска

Содержание MC815C

Отзывы: