Maeda MC815C, Руководство по эксплуатации, Страница: 114 / 426

104
1.2.4 EMERGENCY STOP SWITCH
Use this switch to stop the engine or the electric motor
immediately in case of an emergency due to an
abnormality in the machine.
• ON: Press the switch. The engine or the electric motor
stops.
• OFF: Turn the switch clockwise (in the direction shown by
the arrow in the figure given at the right). The switch
returns to the original position.
NOTES
Before restarting the engine or the electric motor after an
emergency stop, be sure to return the emergency stop
switch to the “OFF” position.
1.2.5 STARTER SWITCH
Be sure to return the starter switch key to the “OFF” position when you finish the work.
Use this switch to start and stop the engine.
• OFF: You can insert/remove the key at this position. All
the switches in the electrical system are turned off and
the engine or the electric motor stops.
• ON: Electricity runs through all the circuits. When the
engine is selected as a power source, wait until the
warm-up indicator lamp goes out in a cold environment,
without changing the switch position.
• START: Enables the engine or the electric motor to start.
When the engine or the electric motor has started,
release your hand from the key. The key automatically
returns to the “ON” position.
1.2.6 LOCK LEVER
Pulling up the lock lever (1) (together with the console box
R (2)) locks out all machine operations. In order to prevent
the machine from operating unexpectedly while an
operator is getting into or off the machine, be sure to pull
the lever up before getting off the machine.
1.2.7 ACCELERATOR PEDAL
Use this lever to adjust the engine speed or output.
• Low idling: Take your foot off the pedal.
• Full speed: Depress the pedal fully.