Maeda MC815C, Руководство по эксплуатации, Страница: 107 / 426

97
[8] Consumables
By touching the screen, a list of consumables and the time until their next their replacement can
be checked.
For the consumables of which scheduled dates for replacement come within 30 hours or 3 days,
each of them are displayed in yellow letters with outlined characters, and for those scheduled
dates for replacement have been reached, each of them are displayed in red letters with a solid
red icon. Both are displayed on the top of the screen. Continuing use of the machine with
consumables that require replacement will cause a hazardous situation or an adverse effect on
the machine. Be sure to immediately replace them.
The consumables included in the list appear on the screen are as follows:
Consumable Items Replacement cycle
Replace hydraulic oil return filter cartridge First 50, 500 hours
Oil replacement for hydraulic oil tank First 50, 1000 hours
Replace oil in winch reduction gear case First 250, 1000 hours
Oil replacement for slewing reduction gear case First 250, 1000 hours
Oil replacement for travel motor reduction gear case First 250, 1000 hours
Replace engine oil 500 hours
Replace engine oil filter 500 hours
Replace fuel pre-filter 500 hours
Replace hydraulic oil tank air filter element 500 hours
Replace fuel main filter 500 hours
Air cleaner 500 hours
[9] Switch operation tone ON/OFF
By touching the screen, the operation tone can be switched ON/OFF.
•
ON : operation tone ON
• OFF : operation tone OFF
[10] Switch hook ground detection ON/OFF
By touching the screen, restriction of crane operation when hook block is grounded can be
switched ON/OFF.
•
ON : Certain operation of crane stops when hook block is grounded.
• OFF : Operation of crane is not restricted when hook block is grounded.
[11] Winch settings in searcher hook mode ON/OFF (only for machine with searcher hook)
Winch movement in searcher hook mode can be switched.
•
ON : Winch can be controlled in searcher hook mode.
• OFF : Winch cannot be controlled in searcher hook mode.