Maeda MC815C Скачать руководство пользователя страница 14

Страница: 14 / 426

3. MACHINE OVERVIEW

3.1 SPECIFIED OPERATIONS

This machine is to be used for the following operations:

• Crane operation

This machine is a mobile crane mounted on a crawler-type carrier and equipped with a

boom-type crane.

This self-propelled crane is capable of moving (travelling) in the worksite and lifting an object

weighing up to the rated total load.

This crane is also equipped with a remote control system.

3.2 MACHINE STRUCTURE

(1) Carrier In this manual, the front, rear, right and left of the machine are determined as

viewed from the driver’s seat in the traveling direction (forward) of the machine.

(2) Crane

The boom slewing directions (clockwise [right] and counterclockwise [left]) are

determined as viewed from above the machine.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 14 / 426

Результаты поиска

Содержание MC815C

Отзывы: