manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 284 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 284

274 

[14] ADJUSTING OPERATOR SEAT 

•  Adjust the operator seat before operation or when the operator changes. 
•  Adjust the seat so that the accelerator pedal can be fully stepped in with the operator's 

back fitting to the back of operator's seat. 

 

[Adjusting seat back and forth] 

1.  Set the seat to the appropriate position while 

lifting up the slide adjustment lever (1). 

2.  Release your hand from the lever (1). 

NOTES 

The fine tuning range by back/forth slide is 160 mm and 
can be adjustable. 

 

[Adjusting reclining] 

CAUTION 

When you recline the back seat, adjust the angle while paying attention to the back 
space. 

 

1.  Set the back seat to the appropriate angle while pressing forward the reclining adjusting 

lever (2). 

2.  Release your hand from the reclining adjusting lever (1). 

 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов