manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 331 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 331

321 

[2] OIL REPLACEMENT IN HYDRAULIC OIL TANK 

•  Various parts are at elevated temperatures immediately after engine operation. Do not 

change the oil immediately. Wait until the oil is cooled. 

•  The oil may spout out when the air filter of the hydraulic oil tank is removed. 
  Remove the air filter to relieve internal pressure by slowly rotating it first. 
•  Securely close the air filter after refilling. 
  If the air filter falls during the operation, hot oil may spout out of the pan, causing 

burns. 

 

CAUTION 

•  See “INSPECTION AND MAINTENANCE 6.1 USE OF LUBRICATING OIL ACCORDING TO 

TEMPERATURES” for the oil to be used. 

•  Be sure to put the machine in the travelling posture when checking the oil level. 
  If you check the oil level in the working posture, you judge the oil level to be low and 

feed the oil excessively. 

• After replacing the hydraulic oil, do not start the engine for a while until piping and 

hydraulic equipment are filled with the oil. 

•  Do not refill oil exceeding the level gauge (H) (upper limit). When the oil goes beyond 

this level, it may spout out from the air filter during traveling or crane operation. 

•  Be careful not to let any foreign substance go into the filler opening when refilling the 

oil. 

 

• Oil drain pan: Prepare a container for at least 120 liters. 

• Quantity of oil in hydraulic oil tank for replacement: 110 L 

1.  Place the machine on a level surface. 

2. 

See “OPERATION 2.14 OUTRIGGER SETTING 

OPERATION” to set all the outriggers. 

NOTES 

After installing the outrigger, raise the machine body 
slightly. 

 

3. 

See “OPERATION 2.19 BOOM DERRICKING 

OPERATION” and raise the boom to the appropriate 

height for operation and stop the engine. 

4. Remove the mounting bolts (2) (2 bolts) and then 

remove the inspection cover (1). 

5.   Remove the air filter 

(F)

 at the top of the hydraulic oil 

tank. 

 

 

 

 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов