manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 188 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 188

178 

2.26.3 PICK & CARRY OPERATIONS 

•  Read the items described in “OPERATION 2.26.1 CAUTIONS DURING PICK 

＆

 CARRY 

OPERATION” when performing pick & carry duties for safe operation. 

• Read “OPERATION 2.26.2 PICK & CARRY POSTURE” when to prepare pick & carry 

posture.  Make sure to follow the process. 

•  Do not perform crane operations during pick & carry. The machine may topple over. 
• Always remain seated in the operator’s seat and carefully perform the pick & carry 

operation. 

•  Verify that it is safe around the machine and honk the horn before starting to move the 

machine. 

•  Verify that it is safe around the machine and honk the horn before switching moving 

forward/backward or steering. 

•  Keep the engine speed at low speed during travelling and travel slowly and carefully.
   Keep  a safe distance so that the hoisted load or machine does not hit other machines 

or structures.  

• When the machine tilts forward/backward/left/right during the crane operation and 

travelling, the overturning alarm buzzer sounds. 

  When the overturning alarm buzzer sounds, stop the work immediately. The machine 

may topple over. 

  Strictly observe the values in the “Hoisted load rated total load” during the crane 

operation. Avoid slopes and obstacles while travelling. 

• If the machine is inclined more than 2 degrees, travelling cannot be operated. 

 
1.  To perform crane operation, confirm if the mode is set to 

Pick & Carry mode now with the mode selector switch 
(3) (Pick & Carry) on the monitor or with the left control 
lever. 

     Perform crane operation with this state.   

 For crane operation, see “OPERATION 2.18 WINDING 

AND UNWINDING” and “OPERATION 2.19 BOOM 
DERRICKING OPERATION”. 
Keep the hoisted load near the ground so that the load 
will not swing. 

NOTES 

• When the moment limiter is activated, the alarm buzzer 

sounds and hazardous boom and winch operations stop 
automatically. 

• If the moment limiter was activated, see the items in 

“OPERATION 1.5.3 [2] RECOVERY OPERATION 
FROM AUTOMATIC STOP”. 

• In Pick & Carry mode, travel speed cannot be set to 

“Hi”. 

 
2.  To travel this machine, shift to the normal Travel mode with the mode selector switch (3) (Pick 

& Carry) on the monitor or with the left control lever. 

     For travel operation, see “OPERATION 2.6 STARTING MOVING MACHINE”, “OPERATION 

2.8 CHANGING DIRECTION OF THE MACHINE”, and “OPERATION 2.9 
STOPPING/PARKING THE MACHINE”. 

NOTES 

• In Travel mode, the Pick & Carry position lamp may lights on and off depending on a load 

weight, but this is not a faulty condition. 

• If travel cannot be operated, check if the machine is in Pick & Carry posture or in overload 

condition. 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов