Maeda MC815C Скачать руководство пользователя страница 43

Страница: 43 / 426

CAUTIONS WHEN STARTING ENGINE

• Make sure no person or object is within the boom slewing

radius area before starting the engine.

• Honk the horn for warning before starting the engine.
• Do not start the engine by short-circuiting the starter circuit.

This may cause a fire.

INSPECTION PRIOR TO TURNING ON THE TRANSMITTER (REMOTE CONTROL
SYSTEM)

• Check for any dirt, damage or cracks in the enclosure, control levers, and operation switches

of the Transmitter.

• Ensure that the control levers and operation switches of the Transmitter move smoothly and

properly.

• Check if the battery is correctly installed and if there is any foreign matter such as a metal or

paper in the case of the remote control system transmitter.

INSPECTION AFTER TURNING ON THE TRANSMITTER (REMOTE CONTROL
SYSTEM)

Check that the display appears on the transmitter.

INSPECTION PRIOR TO TURNING ON THE RECEIVER (REMOTE CONTROL SYSTEM)

• Check for any dirt, damage or cracks in the Control box, Monitor LED, Antenna, etc. of the

Receiver.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 43 / 426

Результаты поиска

Содержание MC815C

Отзывы: