Maeda MC815C, Руководство по эксплуатации, Страница: 221 / 426

211
3. Turn the key to the “START” position.
4. When the electric motor has started, release your hand
from the key.
The key automatically returns to the “ON” position.
5. Conduct a 5-minute warm-up after the electric motor
has started.
NOTES
This machine offersa power saving function, which is activated when the control levers have
been left untouched for 5 minutes after the electric motor started.
In the energy saving mode, the rotation speed of the electric motor significantly drops.
To restore the speed, operate any of the levers.
In addition, the electric motor will stop when the levers have been left untouched for further 30
minutes.
To restart the engine, turn the starter switch to the “START” position again.
6. Use the following procedure for checking the power unit
if an abnormal noise, odor, or vibration is present in or
around the power unit.
(1) Turn the starter switch key to the “OFF” position to
stop the electric motor.
(2) To remove the cover, see “OPERATION 1.11
MACHINERY COVER”.
(3) Check the mounting bolts securing the electric
motor (5) and hydraulic pump (6) for loose or
missing bolts and check the coupling (7) for
looseness.
If checks find loose bolts, retighten the bolts to the
specified torque value.
(4) Keep the area around the power unit free of dead
leaves, paper waste, and dust etc.
Remove any dead leaves, paper, or dust etc.
(5) To put back the cover into place after inspection or
cleaning, see “OPERATION 1.11 MACHINERY
COVER”.
体