manualshive.com logo in svg

Maeda MC815C, Руководство по эксплуатации, Страница: 200 / 426

Поделиться
Скачать
Maeda MC815C Скачать руководство пользователя страница 200

190 

3.6.2 CHANGING DIRECTION OF THE MACHINE 

• Sudden steering or unnecessary spin turns at high speeds not only damages the 

crawler belt or hydraulic devices, but also may result in a collision with other objects.

  Stop the machine, and then adjust the engine speed to low before performing spin 

turns. 

• Do not change direction on a slope. The machine may slip to the side. Be especially 

careful on soft ground and clay soil. 

 

[1] CHANGING MACHINE DIRECTION WHEN STOPPED 

• LEFT TURN 

Pushing the right control lever (2) forward causes the 
machine to turn left in the forward direction. 
Pulling the right control lever (2) toward you causes the 
machine to turn left in the backward direction. 
 

• RIGHT TURN 

Pushing the left control lever (1)

 

forward causes the 

machine to turn right in the forward direction. 
Pulling the left control lever (1) toward you causes the 
machine to turn right in the backward direction. 

 

[2] SPIN TURNS 

•  LEFT SPIN TURN 

Pushing the right control lever (2) forward while pulling the 
left control lever (1) toward you will rotate the crawler belts 
in opposing directions, allowing the machine to spin 
counter-clockwise. 
 

• RIGHT SPIN TURN 

Pushing the left control lever (1)

 

forward while pulling the 

right control lever (2) toward you will rotate the crawler 
belts in opposing directions, allowing the machine to spin 
clockwise. 
 
 
 
 
 
 
 

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов