Maeda MC815C Скачать руководство пользователя страница 295 | Manualshive

Страница: 295 / 426

Maeda MC815C Скачать руководство пользователя страница 295

285

9.1.5 INSPECTION OF ENGINE START AND STOP OPERATION (RADIO

CONTROL)

Ensure that the boom and outriggers are all stowed in the correct positions.
If they are not in the correct positions, use the applicable levers on the machine side to
stow them correctly.
Otherwise, the transmitter operation may cause damage to the Crane or tipping that
results in serious injury.

[1] INSPECTION OF ENGINE START OPERATION

1. Turn “ON” the main starter switch on the machine

side.

2. Press the “start/stop radio control button” (3) of the

transmitter twice to turn the power “ON”.

3. Press the horn switch (7) and check that the horn

sounds.

4. Push down the “Engine start/stop switch (4)” to the

start side and check that the engine starts.

[2] INSPECTION OF ENGINE STOP OPERATION

1. After the engine has started as above [1], push

down the Engine start/stop switch (4) and check

that the engine stops.

2.

After the engine has started as above [1], push the

Emergency stop switch (11) and check that the

engine stops.

Left side

Right side

«
...
293
294
295
296
297
...
»

Содержание MC815C











































































































































































































































































































































































































































Отзывы:

Нет отзывов