Maeda MC815C Скачать руководство пользователя страница 159

Страница: 159 / 426

149

• Drive the machine at as low a speed as possible when

driving down a slope by operating the accelerator pedal
and control levers.

Shifting the control lever into the “NEUTRAL” position

automatically brakes the machine; however, driving down
a slope at high speed may cause the machine to overrun.

• When travelling on a slope, orient the machine so as to be

square to the slope, and operate the machine in a manner
that the operator seat is always located on the higher part
of the slope.

• If the engine stops on a slope, shift the control lever back

into the “NEUTRAL” position, and restart the engine.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 159 / 426

Результаты поиска

Содержание MC815C

Отзывы: