Maeda MC815C Скачать руководство пользователя страница 16

Страница: 16 / 426

4. QUALIFICATION FOR OPERATION

• A high incidence of occupational accidents in crane operation has been reported.

Be aw are that experienced crane drivers are no exception.

• Warnings and precautions defined in this manual shall be observed for safety

assurance during operation of the machine.

4.1 QUALIFICATION FOR CRANE OPERATION

Only personnel that have obtained the required license or training stipulated by laws and

regulations applicable to the place of use are qualified to operate this machine.

Contact the relevant government office or our sales service agency for further information.

Содержание MC815C











































































































































































































































































































































































































































Результаты поиска

Содержание MC815C

Отзывы:

Maeda MC815C, Руководство по эксплуатации, Страница: 16 / 426

Результаты поиска

Содержание MC815C

Отзывы: