
23
USE OF MACHINE THAT WAS RENTED OR PREVIOUSLY USED BY SOMEONE ELSE
Check the following subjects in writing before using any Machine that was rented or previously
used by someone else.
In addition, check the inspection record table for the maintenance conditions such as the
periodic inspections.
(1) Crane capacity
(2) Crane maintenance conditions
(3) Behaviors and disadvantages unique to the crane
(4) Other subjects that require attention while operating
(a Operating condition of brakes
(b) Presence/absence and lighting condition check-up of lighting and rotating lamps
(c) Operating condition of hook, winch, boom, outriggers and related
PROVIDE SAFETY DEVICES FOR SURE
• Check that all guards and covers are attached properly. Repair immediately if damaged.
• Understand how to use the safety devices well and use properly.
• Do not detach the safety devices under any circumstances. Keep control to achieve proper
function all the time.
• Improper use of the safety devices may lead to serious accidents.
• Do not rely too much on the safety devices whilst operating.
FOLLOW INSTRUCTIONS AND SIGNS WHEN WORKING
• When operating the crane, appoint a work supervisor and
mutual signs beforehand, and follow the work supervisor
and signs during operation.
• When operating at a driver's blind spot, especially follow the
instructions and signs of the work supervisor and operate
with caution.
• When operating the crane, the clearance between the boom
and the carrier and also the gaps between the movable parts
of the derrick cylinder may catch body parts such as your
arm or finger.
The operator is requested to make sure no one is within the
working radius of the crane before operating.
PREPARE FOR ABNORMALITY
• Make sure to carry out inspections and maintenances, and
make an effort to prevent accidents before happening.
• Whenever you feel an abnormality in the Machine, abort the
operation immediately, ensure safety and report to the
manager.
• Assign in advance who takes which solution to prevent
secondary accident.
• Never operate the Machine when fuel or hydraulic oil is
leaking from the Machine. Report the manager about the
abnormality, and repair the leaking point of the
fuel/hydraulic oil completely before use.
The fuel for this Machine is diesel fuel. Be especially careful
for the presence of fuel leak.
• Before leaving the Machine, lower the hoisted load to the
ground, stop the engine and pull out the starter switch key.
Содержание MC815C
