Maeda MC815C, Руководство по эксплуатации, Страница: 273 / 426

263
9.1.2 INSPECTION BEFORE STARTING ENGINE
Check the following in this section without starting the engine and before the work every day.
[1] CHECKING/REFILLING ENGINE COOLANT
Do not check or refill the coolant with the radiator cap removed. Always check and refill
in the reserve tank. Heated coolant may spout, causing burns.
1. Place the machine on a level surface.
2. See “OPERATION 1.8 RADIATOR COVER” and remove
the radiator cover.
3. Check the coolant level in the reserve tank (1) to see if
it is between “LOW” and “FULL”.
[When the coolant level is lower than the “LOW” level]
Use the following procedure to refill tap water.
(1) Remove the cap (2) of the reserve tank (1) and fill
the water from the filler opening to the level “FULL”.
(2) After refilling coolant, securely re-install the cap (2)
of the reserve tank (1).
[When the reserve tank is empty]
Follow the steps below.
(1) See “OPERATION 1.10 ENGINE COVER” and
remove the engine cover.
(2) Remove the radiator cap (3) and check the coolant
level in the radiator.
(3) If the coolant level in the radiator was low, check
the radiator, radiator hose, and engine for water
leakage.
(4) Fill coolant from the radiator filler opening and
securely install the radiator cap (3).
(5) Remove the cap (2) of the reserve tank (1) and fill
the water from the filler opening to the level “FULL”.
(6) After refilling coolant, securely re-install the cap
(2) of the reserve tank (1).
(7) See “OPERATION 1.10 ENGINE COVER” and
install the engine cover.
4. See “OPERATION 1.8 RADIATOR COVER” and install
the radiator cover.