Maeda MC815C, Руководство по эксплуатации, Страница: 209 / 426

199
3.8 CRANE OPERATION
• Ensure that all the outriggers are securely settled, before starting crane operations.
Any crane operations where outriggers are improperly used may cause the crane to tip
over or other serious accidents.
• During crane operations, always refer to the “Rated total load chart” and avoid
over-loaded operations. Operations in over-loaded conditions may damage or tip the
Crane, resulting in a serious hazard.
• Make sure the Transmitter operation levers all operate smoothly and return to the
neutral position when you release your finger.
• Each operation lever of the Transmitter will be blocked by its stopper when it is
pushed fully. When it is blocked, do not attempt to push further. Otherwise, it may
damage the Transmitter and cause faults and result in a serious accident.
• Before operating the crane, set the mode selector switch (5) to Crane. In the Outrigger
mode, the outrigger operates unexpectedly, which is very dangerous.
• Always actuate the operation lever with caution.
Make adjustments to achieve the optimal operation speed for crane operation to avoid
abrupt movement.
Any abrupt acceleration or deceleration especially while a load is hoisted will make a
large impact to the Crane and may result in a serious hazard such as Crane tipping or
damage.
• While hoisting a load, do not attempt to perform multiple operations simultaneously.
That may cause an abrupt change of the load condition and cause a serious hazard
such as the Crane tipping or damage.
1. Turn the starter switch on the machine to the “ON”
position.
2. Press the power ON/OFF switch (3) for the remote
control transmitter to supply power to the transmitter.
For details about the power-on, refer to “OPERATION
3.2 POWERING ON”.
3. Set the operation mode selector switch (5) for the
transmitter to Travel.
4. Press the engine start/stop switch (4) to start the
engine.
For details about the engine start, refer to “OPERATION
3.4 STARTING/STOPPING THE ENGINE”.