Device description
Leuze electronic GmbH + Co. KG
CML 730i
19
Menu “Digital IOs”
Operation settings
Filter depth
(enter value)
min = 1
max = 255
Beam mode
Parallel
Diagonal
Crossed-beam
Function reserve
High
Medium
Low
Transparent
Switching threshold
(enter value)
min = 10
max = 98
Blanking Teach
Not active
Active
Power-Up teach
Not active
Active
Smoothing
(enter value)
min = 1
max = 255
Inv. Smoothing
(enter value)
min = 1
max = 255
Counting direction
Selection of whether the first or last beam is positioned on the connec
-
tion side
Normal = First beam on the connection side
Inverted = Last beam on the connection side
IO-Link
Bit Rate
COM3: 230.4 kbit/s
COM2: 38.4 kbit/s
PD Length
2 bytes
8 bytes
32 bytes
Data Storage
Deactivated
Activated
CANopen
Node ID
(enter value)
min = 1
max = 127
Bit Rate
1000 kbit/s
500 kbit/s
250 kbit/s
125 kbit/s
PROFIBUS
Slave address
(enter value)
min = 1
max = 126
Bit Rate
3000 kbit/s
1500 kbit/s
500 kbit/s
187.5 kbit/s
93.75 kbit/s
45.45 kbit/s
19.2 kbit/s
9.6 kbit/s
PROFINET
Device name
IP address
Subnet mask
Gateway
MAC address
Read-only parameter – assigned dynamically by the control
Device-specific MAC address, as specified on the name plate
RS 485 Modbus
Slave address
(enter value)
min = 1
max = 247
Bit Rate
921.6 kbit/s
115.2 kbit/s
57.6 kbit/s
38.4 kbit/s
19.2 kbit/s
9.6 kbit/s
4.8 kbit/s
Parity
None
Straight
Not straight
Silent Interval
0 =auto
(enter value)
min = 1
max = 300
Level 1
Level 2
Description
IO Logic
Positive PNP
Negative NPN
IO Pin 2
IO Pin 5
IO Pin 6
IO Pin 7
IO function
Trigger In
Teach In
Area Out
Warn Out
Trigger Out
Inversion
Normal
Inverted
Teach height
Execute
Exit
Area logic
AND
OR
Start beam
(enter value)
min = 1
max = 1774
End beam
(enter value)
min = 1
max = 1774
Level 1
Level 2
Description
