Example configurations
Leuze electronic GmbH + Co. KG
CML 730i
165
15.2.3 Configuration of area/output mapping via CANopen interface
Map the beams to output pin 2 as follows.
15.2.4 Configuration of area/output mapping via PROFIBUS interface
Map the beams to output pin 2 as follows.
15.2.5 Configuration of area/output mapping via PROFINET interface
Map the beams to output pin 2 as follows.
Configuration of area 01
(module 8)
Index 0x2170 sub 01:
= 1
Area 01 active
Index 0x2170 sub 02:
= 0
Light switching
Index 0x2170 sub 03
= 1
Start beam of area
Index 0x2170 sub 04:
= 32
End beam of area
Index 0x2170 sub 05:
= 32
Number of active beams for area ON
Index 0x2170 sub 06:
= 31
Number of active beams for area OFF
Switching level of inputs/out
-
puts
(module 7)
Index 0x2151 sub 01:
= 0
Pin 2 as output
Index 0x2151 sub 03:
= 1
Switching behavior inverted
Index 0x2151 sub 04:
= 1
Switching output area 32 … 1
Index 0x2155 sub 03:
= 1
Bit mapping of area 01 to pin 2
Area settings (module 18)
Parameter
Area configuration
:
= 1
Area 01 selected
Parameter
Area
:
= 1
Area 01 active
Parameter
Logical behavior of the area
:
= 0
0: Normal - light switching
Parameter
Start beam of the area
:
= 1
Start beam of area
Parameter
End beam of the area
:
= 32
End beam of area
Parameter
Number of active beams → ON
:
= 32
Number of active beams for area ON
Parameter
Number of active beams → OFF
:
= 31
Number of active beams for area OFF
Configuration of digital I/Os
(module 13)
Parameter
Pin 2 - Input/output selection
:
= 0
Pin 2 as output
Parameter
Pin 2 - Switching behavior
:
= 1
Switching behavior inverted
Parameter
Pin 2 - Output function
:
= 1
Switching output area 1 … 32
Parameter
Pin 2 - Area mapping 32 … 1
:
= 1
Bit mapping of area 01 to pin 2
Area settings (module 40)
Parameter
Area configuration
:
= 1
Area 01 selected
Parameter
Area
:
= 1
Area 01 active
Parameter
Logical behavior of the area
:
= 0
0: Normal - light switching
Parameter
Start beam mode
:
= 0
Used beam number
Parameter
Start beam of the area
:
= 1
Start beam of area
Parameter
End-beam mode
:
= 0
Used beam number
Parameter
End beam of the area
:
= 32
End beam of area
Parameter
Number of active beams → ON
:
= 32
Number of active beams for area ON
Parameter
Number of active beams → OFF
:
= 31
Number of active beams for area OFF
