Starting up the device - Basic configuration
Leuze electronic GmbH + Co. KG
CML 730i
72
Select Digital IOs > IO Logic > Positive PNP.
Select Digital IOs > IO Pin 2 > IO Function > Warn Out.
Configuration of pin 2 as PNP trigger input
The following example shows the configuration of pin 2 as PNP trigger input.
Select Digital IOs > IO Logic > Positive PNP.
Select Digital IOs > IO Pin 2 > IO Function > Trigger input.
A teach input is configured according to the same principle.
Select Digital IOs > IO Logic > Positive PNP.
Select Digital IOs > IO Pin 2 > IO Function > Teach Input.
Configuration of pin 5 as PNP height area
The following example shows the configuration of pin 5 as PNP height area.
Select Digital IOs > IO Logic > Positive PNP.
Select Digital IOs > IO pin 5 > Teach height > Execute.
Area logic
AND
OR
Start beam
(enter value)
End beam
(enter value)
Level 0
Level 1
Level 2
Description
Digital IOs
IO Logic
Positive PNP
Negative NPN
IO Pin 2
IO Function
Trigger In
Teach In
Area Out
Warn Out
Trigger Out
Inversion
Normal
Inverted
Teach height
Execute
Exit
Area logic
AND
OR
Start beam
(enter value)
End beam
(enter value)
Trigger input and output are only active if cascading (triggered operation) was activated via the
configuration interface or process interface.
Level 0
Level 1
Level 2
Description
Digital IOs
IO Logic
Positive PNP
Negative NPN
IO Pin 5
IO function
Trigger In
Teach In
Area Out
Warn Out
Trigger Out
Inversion
Normal
Inverted
Teach height
Execute
Exit
Area logic
AND
OR
Start beam
(enter value)
End beam
(enter value)
Level 0
Level 1
Level 2
Description
