Leuze 50117911 Скачать руководство пользователя страница 186

Страница: 186 / 231

Connecting to a PC – Sensor Studio

Leuze electronic GmbH + Co. KG

CML 730i

186

The Installation Wizard installs the software and places a shortcut on the desktop (

16.2.3 Connecting IO-Link USB master to the PC

The light curtain is connected to the PC via the IO-Link USB master (see table 21.27).



Connect the IO-Link USB master to the plug-in power supply unit or the mains supply.



Connect the PC to the IO-Link USB master.

IO-Link USB master

Plug-in power supply unit

Figure 16.1: PC connection via the IO-Link USB master



The wizard for searching for new hardware starts and installs the driver for the IO-Link USB master on

the PC.

16.2.4 Connect the IO-Link USB master to the light curtain

Prerequisites:

• IO-Link USB master and PC are connected via the USB interconnection cable.
• IO-Link USB master is connected to the mains supply with the plug-in power supply unit.

Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for

connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short

description.

The mains supply of the IO-Link USB master via the plug-in power supply unit is only activated

if IO-Link USB master and PC are connected via the USB interconnection cable.

NOTICE
Connect the plug-in power supply unit for IO-Link USB master!



To connect a light curtain, the plug-in power supply unit must be connected to the IO-Link USB master

and the mains supply.
The voltage supply via the USB interface of the PC is permissible only for IO-devices with a current

consumption of up to 40 mA at 24 V.

Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for

connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short

description.

The voltage supply of the IO-Link USB master and the light curtain via the plug-in power supply

unit is only activated if IO-Link USB master and PC are connected via the USB interconnection

cable.

Содержание 50117911








































































































































































































































Результаты поиска

Содержание 50117911

Отзывы:

Похожие инструкции для 50117911

Бренды по названию

Популярные бренды

Leuze 50117911, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание 50117911

Отзывы:

Похожие инструкции для 50117911

Бренды по названию

Популярные бренды