Leuze 50117911, Оригинальная инструкция по эксплуатации

Страница: 130 / 231

Starting up the device - PROFINET interface
Leuze electronic GmbH + Co. KG CML 730i 130
Module 05 Number of interrupted beams (see
chapter 13.4.9)
0 2 0
Module 06 Total of not interrupted beams (see
chapter 13.4.10)
0 2 0
Module 07 Status of beam area 16 … 1 (see
chapter 13.4.11)
0 2 0
Module 08 Status of beam area 32 … 17 (see
chapter 13.4.12)
0 2 0
Module 09 Status digital inputs/outputs (see
chapter 13.4.13)
0 2 0
Module 10 Status of CML 700i (see chapter 13.4.14) 0 2 0
Module 11 Detailed status information (see
chapter 13.4.15)
0 2 0
Beam-stream modules 20 … 27 (see chapter 13.4.16)
Module 20 Beam-stream 1 (16 bit) 1 2 0
Module 21 Beam-stream 2 (32 bit) 1 4 0
Module 22 Beam-stream 3 (64 bit) 1 8 0
Module 23 Beam-stream 4 (128 bit) 1 16 0
Module 24 Beam-stream 5 (256 bit) 1 32 0
Module 25 Beam-stream 6 (512 bit) 1 64 0
Module 26 Beam-stream 7 (1024 bit) 1 128 0
Module 27 Beam-stream 8 (1774 bit) 1 222 0
Module 30 General settings (see chapter 13.4.17) 3 0 0
Module 31 Extended settings (see chapter 13.4.18) 4 0 0
Module 32 Configuration of digital I/Os (see
chapter 13.4.19)
16 0 0
Module 33 Teach settings (see chapter 13.4.20) 3 0 0
Module 34 Cascading configuration (see chapter 13.4.21) 7 0 0
Module 35 Blanking configuration (see chapter 13.4.22) 21 0 0
Module 36 Autosplitting configuration (see
chapter 13.4.23)
1 0 0
Modules 40 … 71 Area settings (see chapter 13.4.24) 14 0 0
Module 80 Sensor command module (see chapter 13.4.25) 0 4 4
Module no. Module name Parame
-
ter
Input data Output
data