Functions
Leuze electronic GmbH + Co. KG
CML 730i
38
1
Teaching height area 1
2
Teaching height area 2
Figure 4.16: Teaching the height area with the
Teach in height area
function
• To define the entire beam area as a height area, teaching of the height area is performed without an
object (all beams free).
Figure 4.17: Teaching of the total beam area as height area without object
• The switching behavior or the conditions for switching the height area on or off via the
Teach height
area
function is permanently defined as OR.
• Every IO pin can be assigned to a height area via the receiver control panel.
Example: Digital IOs > IO Pin 2 > Teach height > Execute
Example configurations for the assignment of previously defined height areas to switching outputs Q1 to
Q4:
• see chapter 15.2 "Example configuration - Mapping of beams 1 … 32 to output pin 2"
On the receiver control panel, the
Teach height area
function is activated via the Teach height
menu item. Example: Digital IOs > IO Pin 2 > Teach height > Execute
If the
Teach height area
function is activated via the receiver control panel, the IO pins are auto
-
matically assigned to the height areas.
1
2
